This weekend we continued finishing minor details and began setting up the Skyview system. After updating some of the hardware, we got the system to acknowledge the presence of the autopilot servos, ADAHRS unit, GPS, EMS, and transponder. We calibrated the autopilot, but still have quite a few more things to calibrate before we are finished with the Skyview setup.
The last section of the plans details where to apply the various placards and stickers on the airframe.
Also, we were able to change the placement of two wires in one of the harnesses so that the lights now do what the switch says they should do.
No comments:
Post a Comment